Nanoteam Insulation Ltd.,
Evesham, 9 Monks Walk
WR11 4SL UK
NANO INSULATION FEATURES
Unbeatable Quality
HEAT REFLECTION IS 60-70%
The superior heat reflection capacity of Nano Insulation is due to the vacuum-filled ceramic balls. The distribution of these balls as well as the binding material and the additives (filling material) significantly reduce the heat conductive capacity of the Nano Insulation compared to materials of the same density.
Generally Nano Insulation can perform the following heat insulation efficiency:
1 x 0.5 mm layer 30-35% efficiency
2 x 0.5 mm layer 45-50% efficiency
4 x 0.5 mm layer 65-70% efficiency
​
Heat insulating
​
Nano Insulation is a capillary-porous body differing from the conventional heat insulating materials regarding the space between the porous particles.
The porosity in the ceramic balls significantly reduces the convective component of heat transfer. In addition due to the high-degree of heat reflection of the ceramic balls the radiant heat transfer component is much lower than in the case of conventional heat insulating materials.
With Nano Insulation the effective heat conduction is very low.
​
SIMPLE, FAST AND COST EFFECTIVE
Using an airless sprayer some 40 - 80 m2 / hour can be coated.
One of the greatest advantages of the Nano Insulation is the application.
Before application the surface has to be cleaned and any possibly separating parts have to be removed.
After this the insulation coat can be applied directly onto the dry surface.
Depending on the project masking or covering of windows etc. can be necessary. However, no auxiliary material is needed (e.g. mesh, grid, glue, guide, etc.).
​
The application is executed with airless sprayer (e.g. Graco UltraMax) which makes the work fast and precise and results in an even surface.
With the 2 spraying heads two persons can work with the equipment at the same time.
COLOURABLE
The Nano Insulation can be coloured with any acrylic-based paint. However, we can also offer factory-made colours.
Nano Insulation is a non-combustible material. Carbonization temperature is 500°C , decomposition temperature is 840°C. At this temperature, carbon-dioxide and nitrogen-oxide are released hindering any further spread of fire. For special field of use we can offer our ant-fire and anti-fire wood agents.
ADVANTAGES IN EXECUTION
FURTHER ADVANTAGES
NOISE INSULATION
Depending on the surface the material reduces noise level by 2dB.
WATER TIGHT
The water absorbing capacity of Nano Insulation is 0.003g/m2 and is completely water-tight in case a 2mm layer is applied.
WAPOR PERMEABILITY
The water permeability of Nano Insulation is 0.0014 mg/(m*hour*Pa) (0.2Sd vapour permeable), 40g/m2/day, preventing the development of mold and hinders any steaming-up on the surface. For special demands ask for our anti-moisturing agent for prevention or treatment in affected areas.
ANTI-CORROSIVE
Nano Insulation protects from corrosion. For special cases we can offer special anti-corrosive agent.
NON-COMBUSTIBLE
ENVIROMENT-FRIENDLY
Does not contain harmful or poisonous components.
DURABLE
Its service life exceeds 30 years, with a 20-year post-application guarantee.
NANO INSULATION EXECUTION
No service area necessary, no permission needed
Execution time (average private house) 3-5 days
Plus thickness on the insulated surface 1-1,5 mm
Smallest cavities, windows and doors
can be insulated without any difficulty
Final surface like painted wall/surface
does not change aesthetics of the building
(historical buildings, special designs)
No scaffolding needed in average cases (application from the ground, by lifter, by alpine tech)
No auxiliary means needed just stable surface
No colouring necessary, the material works
as colour paint and can be stained
Environmental friendly material
no waste
No mess and noise
Not combustible, doesn’t feed but hinders fire
Hinders / treats moulding and humidification
No rodent hazard
TRADITIONAL APPLICATION
Service area and permission needed
3 week at the minimum
Thick, takes too much space
Is there enough space? Window opening hindered
takes away space, hinders view
May influence aesthetical and structural
appearance of the building, for it cannot
follow the shape
Scaffolding needed by all means (time, costs) Industrial safety!
Many auxiliary and supplementary means and material needs
Plastering and painting is necessary on the insulated surface
Substantial amount of polluting waste, hard to remove, non recyclable, environmental "unfriendly"
Noise and environment pollution
Combustible
Subject to moulding and humidification
Rodent hazard
CONTACT US
​
Susan Wlassics - International and Hungary +36 30 7375 611
​
​
